WiFi Router Setup

WiFi Configuration

Everyone is connected to the internet these days. Almost all broadband routers come with a Wi-Fi antenna that allows you to connect to the Internet from any device without a LAN cable. But what happens if your home is too big to be covered by a single Wi-Fi router?

If that is the case, you can always get another Router admin access and use it as a repeater. That means you can expand the coverage of your primary so that it covers the entire house as an Administration. You can find a detailed step-by-step guide on how to do it next.

Connecting an additional Wi-Fi Broadband Router

You can connect to another to an existing one in different ways. You can use a LAN cable to extend the Wi-Fi connection to other However, this is not always practical, especially if the location of the second wireless page is too far from the first. That's why it's better to connect the repeater to your original router via Wi-Fi. The process is the same 192.168.1.1 could most wireless TP link routers. Here is what you need to do to extend your Wi-Fi Router IP ranges:

Connect your PC to your first ADSL Router through Wi-Fi for router setup. (Enter "user" as your usernames and passwords). Open http://tplinkwifi.net/ or access the configuration of the TP-link router by entering 192.168.1.1 or 192.168.0.1 in the search bar of your browser. Find the place where it says "Wireless Configuration" and check "Enable WDS". Assign a name to your Wi-Fi as desired, by completing the SSID bar at the top of the wireless settings page.

Click on "Search / Survey" and router login. Find the SSID and the channel of your root AP. Click on "Connect." The SSID and BSSID (for Mac users) will be completed automatically. When finished, enter the wireless security settings and the channel to match the root of the original AP. Click on information and "Save." Look for the "Wireless Security" tab to protect. The encryption settings will be different from the screenshot. Click "DHCP" and then "DHCP Configuration." Look for the option "DHCP Server" and check "Deactivate". Press the "Save" button. Select the "Network" tab and click "LAN." Modify of the router and press "Save". (You must enter the as your root network uses). Click on "System Tools" and select "Restart panel. "Check for a connection, if you do not have one yet,restart and try again. If it still does not work, Admin Page your devices may be incompatible in WDS bridge mode.

Configuring your router with an access point

You can also create an additional access point by connecting a TP-Link router through the LAN port. That will not be a wireless connection because gateway ip address you have to connect the two routers with an Ethernet cable. Here is how you can do that:

Using an Ethernet cable, connect your PC to the second LAN port on the TP-Link N router. Use the located at the bottom of the router to log in to the TP-Link web interface. Click on Admin Page "Network" and then on "LAN." Chang and enter the address found on your TP-Link N Router. Restart the router and use log in. Click on "Wireless" and select "Wireless Configuration" to configure the SSID. Click on "Save."

Go back to "Wireless" and select "Wireless Security". Use WPA / WPA2-Personal since it is the safest option. Click on "Save." Go to "DHCP" and select "DHCP Configuration". Check "Deactivate", where it says "DHCP Server". Click on "Save." Open "System Tools" and select "Restart" to restart your device. Connect Modem to your TP-Link N router using the Ethernet cable. The will now act as an additional access point for your devices. It can be connected through or cable.

Expand your Wi-Fi connection and cover every inch of your home

The two methods we have just covered with will help you get full WiFi coverage in your home. You can connect several to extend the Wi-Fi network where you need it. The second method requires modem Password along a cable connection between the modems, so it is only available if you can physically connect them. Here is Password List for

Now that you have learned 192.168.l.l Login necessary how to provide the Wi-Fi connection anywhere you want (even in your backyard), your guests, friends and family can surf the Internet, no matter how far away they are from the main Quick Setup Guide.

Reference : 19216811.is (192.168.1.1 Manual)

Router/Modem ports

Top